Pump Product List

Slurry, Solids, Dewatering & Self-Priming Pumps

GET STARTED

Contact us about dredge engineering, equipment, pumping, and dewatering to
meet your contract
requirements.

2 -Inch Skid Mounted Diesel Solids Pump

Slurry & Sludge Pumps are designed for high solids industrial pump applications. Our slurry sump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications. The 2″ Pump open rotor design with high tolerances allow pumping of up to 1.75″ solids without issues. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH of up to 90 feet. 1800 RPM motor speed. Percentage of solids up to 40-70%. Standard Materials for wet ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

 3-Inch Skid Mounted Diesel Solids Pump

Slurry & Sludge Pumps are designed for high solids industrial pump applications. The 3″ pump’s open rotor design with high tolerances allow pumping of up to 3″ solids without issues. Operating Levels: 100-780 Gallons Per Minute (GPM) at TDH of up to 130 feet. 1800 RPM motor speed. Percentage of solids up to 40-70%. Standard Materials for wet ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

2-Inch Skid Mounted Electric Solids Pump

Slurry & Sludge Pumps are for high solids industrial pump applications. Our slurry pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. The 2″ Pump’s open rotor design with high tolerances allow pumping of up to 1.75″ solids without issues. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH up to 90 feet. 1800 RPM motor speed. Percentage of solids up to 40-70%. Standard Materials: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

3-Inch Skid Mounted Electric Solids Pump

Non-Clog High Solids Pump – Slurry & Sludge Pumps are for high solids industrial pump applications. Our slurry pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. The 3″ Pump’s open rotor design with high tolerances allow pumping of up to 3″ solids without issues. Operating Levels: 100-780 Gallons Per Minute (GPM) at TDH of up to 130 feet. 1800 RPM motor speed. Percentage of solids up to 40-70%. Standard Materials: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

2-Inch Trailer Mounted Diesel Solids Pump

Slurry & Sludge Pumps are designed for high solids industrial pump applications. Our slurry pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. The 2″ Pump’s open rotor design with high tolerances allow pumping of up to 1.75″ solids without issues. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH of up to 90 feet. 1800 RPM motor speed. Percentage of solids up to 40-70%. Standard Materials: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

 3-Inch Trailer Mounted Diesel Solids Pump

Non-clog pumps are designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. The 3″ Pump’s open rotor design with high tolerances allow pumping of up to 3″ solids without issues. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH of up to 130 feet. 1800 RPM motor Percentage of solids up to 40-70%. Standard Materials for wet ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Design. This is a self-priming pump designed to prime automatically by being submerged in the fluid to be pumped, there is no need for manual priming.

2-Inch Electric Submersible Solids Sump Pump

Slurry pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH up to 90 feet. Ability to transport up to 40-70% olids. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. The 2- inch pump’s open rotor design with high tolerances allow pumping of up to 1.75-inch solids without issues. This means more uptime, less clogs, less maintenance, and lower cost of ownership.

3-Inch Electric Submersible Solids Sump Pump

Slurry pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Operating Levels: 100-780 Gallons Per Minute (GPM) at TDH up to 130 feet. Ability to transport up to 40-70% Solids. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. The 3- inch pump’s open rotor design with high tolerances allow pumping of up to 3-inch solids without issues. This means more uptime, less clogs, less maintenance, and lower cost of ownership.

2-inch Electric  Sump Pump with Internal Chopper Blade

2-inch Electric Driven Non-Clog Sump Pump with Internal Chopper Blade. Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 50-390 Gallons Per Minute (GPM), TDH up to 90 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 2-inch pump has the ability to pump objects of up to 1.75-inches in diameter.

3-inch Electric Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 100-780 Gallons Per Minute (GPM), TDH up to 130 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 3-inch Pump has the ability to pump objects of up to 3-inches in diameter.

4-inch Electric Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 250-2100 Gallons Per Minute (GPM), TDH up to 160 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 4-inch pump has the ability to pump objects of up to 4-inches in diameter.

6-inch Electric Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 450-2500 Gallons Per Minute (GPM), TDH up to 200 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 6-inch pump has the ability to pump objects of up to 6-inches in diameter.

8-inch Electric Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM), TDH up to 230 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1200 RPM max motor speed. The 8-inch pump has the ability to pump objects of up to 8-inches in diameter.

10-inch Electric Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM), TDH up to 240 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1200 RPM max motor speed. The 10-inch pump has the ability to pump objects of up to 10-inches in diameter.

12-inch Electric Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM), TDH up to 180 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 900 RPM max motor speed. The 12-inch pump has the ability to pump objects of up to 12-inches in diameter.  

2-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 100-500 Gallons Per Minute (GPM), TDH up to 90 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 2-inch pump has the ability to pump objects of up to 1.75-inches in diameter.

3-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM), TDH up to 180 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 3-inch pump has the ability to pump objects of up to 3-inches in diameter

4-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive  displacement pumps in a variety of the most difficult applications. Operating Levels: 250-2100 Gallons Per Minute (GPM), TDH up to 130 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 4-inch pump has the ability to pump objects of up to 4-inches in diameter.

6-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high  solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive  displacement pumps in a variety of the most difficult applications. Operating Levels: 450-2500 Gallons Per Minute (GPM), TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1800 RPM max motor speed. The 6-inch pump has the ability to pump objects of up to 6-inches in diameter.

8-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM), TDH up to 160 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1200 RPM max motor speed. The 8-inch Pump has the ability to pump objects of up to 8-inches in diameter.

10-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 1600- 5000 Gallons Per Minute (GPM), TDH up to 200 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 1200 RPM max motor speed. The 10-inch Pump has the ability to pump objects of up to 10-inches in diameter.

12-inch Hydraulic Non-Clog Sump Pump with Internal Chopper Blade

Designed for high solids industrial slurry pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult applications. Operating Levels: 2600- 7300 Gallons Per Minute (GPM), TDH up to 180 feet. Pump solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design: Transport 40-70% Solids. 900 RPM max motor speed. The 12-inch pump has the ability to pump objects of up to 12-inches in diameter.

2-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 50-390 Gallons Per Minute (GPM) at TDH up to 90 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 1.75-inches in diameter

3-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 100-780 Gallons Per Minute (GPM) at TDH up to 130 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 3-inches in diameter.

4-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 4-inches in diameter.

6-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 6-inches in diameter

8-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 8-inches in diameter.

10-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 10-inches in diameter.

12-inch Extended Shaft Electric Driven Sump Pump

Submersible Non-Clog Pump with Dry Motor and Internal Chopper Blade. Designed for high solids industrial pumping applications. Our patented pump technology outperforms all centrifugal, vortex and displacement pumps in a variety of the most difficult pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%,Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump objects of up to 10-inches in diameter

4-inch Self-Priming Trailer Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 4-inches in diameter. 1800 RPM max motor speed.

6-inch Self-Priming Trailer Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 6-inches in diameter. 1800 RPM max motor speed.

8-inch Self-Priming Trailer Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Ability to pump objects of up to 8-inches in diameter. 1200 RPM max motor speed.

10-inch Self-Priming Trailer Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 10-inches in diameter. 1200 RPM max motor
speed.

12-inch Self-Priming Trailer Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 12-inches in diameter. 900 RPM max motor speed.

4-inch Self-Priming Trailer Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction  hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 4-inches in diameter. 1800 RPM max motor speed.

6-inch Self-Priming Trailer Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 6-inches in diameter. 1800 RPM max motor speed.

8-inch Self-Priming Trailer Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 8-inches in diameter. 1200 RPM max motor speed.

10-inch Self-Priming Trailer Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 10-inches in diameter. 1200 RPM max motor speed.

12-inch Self-Priming Trailer Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 12-inches in diameter. 900 RPM max motor speed.

4-inch Self-Priming Skid Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a supersized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 4-inches in diameter. 1800 RPM max motor speed.

6-inch Self-Priming Skid Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a supersized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 6-inches in diameter. 1800 RPM max motor speed.

8-inch Self-Priming Skid Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a supersized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 8-inches in diameter. 1200 RPM max motor speed.

10-inch Self-Priming Skid Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and  Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 10-inches in diameter. 1200 RPM max motor speed.

12-inch Self-Priming Skid Mounted Diesel Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 12-inches in diameter. 900 RPM max motor speed.

4-inch Self-Priming Skid Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 4-inches in diameter. 1800 RPM max motor speed.

6-inch Self-Priming Skid Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 6-inches in diameter. 1800 RPM max motor speed.

8-inch Self-Priming Skid Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 8-inches in diameter. 1200 RPM max motor speed.

10-inch Self-Priming Skid Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 10-inches in diameter. 1200 RPM max motor speed.

12-inch Self-Priming Skid Mounted Electric Pump

With a self-priming unit, the pump and power unit are not submerged. The suction hose goes into the slurry and the unit acts like a super-sized wet dry vacuum. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Ability to pump objects of up to 12-inches in diameter. 900 RPM max motor speed.

4-inch Hydraulic Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Operating Levels: 250-1200 Gallons Per Minute (GPM) at TDH up to 200ft. Ability to pump solids up to 3-inches in diameter. Can be powered by an HPU or excavator auxiliary power.

6-inch Hydraulic Excavator Pump Attachment 

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200ft. Ability to pump solids up to 5-inches in diameter. Can be powered by an HPU (recommended) or excavator auxiliary power.

8-inch Hydraulic Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Operating Levels: 800-4000 Gallons Per Minute (GPM) at TDH up to 200ft. Ability to pump solids up to 7- inches in diameter. This unit is powered by a separate HPU.

10-inch Hydraulic Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Operating Levels: 1200-5000 Gallons Per Minute (GPM) at TDH up to 200ft. Ability to pump solids up to 9-inches in diameter. This unit is powered by a separate HPU.

12-inch Hydraulic Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Operating Levels: 1800-7000 Gallons Per Minute (GPM) at TDH up to 200ft. Ability to pump solids up to 11-inches in diameter. This unit is powered by a separate HPU.

4-inch Electric Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Production: 250-1200 GPM or 75-150 cubic yards of material per hour. Ability to pump solids up to 3-inches in diameter.

6-inch Electric Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for  material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Production: 450-2000 GPM or 150-200 cubic yards of material per hour. Ability to pump solids up to 5-inches in diameter.

8-inch Electric Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Production: 800-4000 GPM or 250-300 cubic yards of material per hour. Ability to pump solids up to 7-inches in diameter.

10-inch Electric Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Production: 1200-5000 GPM or 350-400 cubic yards of material per hour. Ability to pump solids up to 9-inches in diameter

12-inch Electric Excavator Pump Attachment

Ideal for pumping slurry from barges, rail cars, pits, lined ponds or other bodies used for material storage. By attaching the pump to a standard boom or long boom excavator you can get reach of up to of up to 75-ft and handle the most difficult applications. Designed for high solids dredging applications. Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in the most difficult pumping applications. Production: 1800-7000 GPM. Ability to pump solids up to 11-inches in diameter.

4-inch Hydraulic Cable-Deployed Crane Jetting Pump

Is ideal for projects where a crane is available. The Pump is run by hydraulics and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the Pump. Operating Levels: 250-1200 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity,  High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inches in diameter.

6-inch Hydraulic Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run by hydraulics and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 6-inches in diameter.

8-inch Hydraulic Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run by hydraulics and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 800-4000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inches in diameter.

10-inch Hydraulic Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run by hydraulics and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 1200-5000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Hydraulic Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run by hydraulics and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 1800-7000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 12-inches in diameter.

4-inch Electric Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run electrically and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 250-1200 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40- 70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inches in diameter.

6-inch Electric Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run electrically and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the Pump. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40- 70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Transport 40-70% Solids. Ability to pump solid objects of up to 6-inches in diameter.

8-inch Electric Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run electrically and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 800-4000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inches in diameter.

10-inch Electric Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run electrically and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the pump. Operating Levels: 1200-5000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Electric Cable-Deployed Crane Jetting Pump

Ideal for projects where a crane is available. The pump is run electrically and suspended from the crane on a cable. The water-jetting system breaks up the material and feeds the Pump. Operating Levels: 1800-7000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40- 70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 12-inches in diameter.

4-inch Hydraulic Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inchesin diameter.

6-inch Hydraulic Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 6-inches in diameter.

8-inch Hydraulic Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inchesin diameter.

10-inch Hydraulic Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Hydraulic Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 12-inches
in diameter.

4-inch Electric Submersible Pump

Slurry Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inches in diameter.

6-inch Electric Submersible Pump

Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump solid objects of up to 6-inches in diameter.

8-inch Electric Submersible Pump

Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is
no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inches in diameter.

10-inch Electric Submersible Pump

Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is
no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Electric Submersible Pump

Pumps that are completely submerged in the liquid are called submersible pumps. By being submerged in the fluid to be pumped, there is no need for priming. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 12-inches in diameter.

4-inch Diesel Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications.  Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inches in diameter.

6-inch Diesel Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications.  Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 6-inches in diameter.

8-inch Diesel Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inches in diameter.

10-inch Diesel Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Diesel Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications.  Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to ump solid objects of up to 12-inches in diameter.

4-inch Electric Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 4-inches in diameter

6-inch Electric Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 450-2000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 6-inches in diameter

8-inch Electric Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 8-inches in diameter.

10-inch Electric Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 10-inches in diameter.

12-inch Electric Skid Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solids. Ability to pump solid objects of up to 12-inches in diameter.

4 -inch Electric Trailer Mounted Pump

Non-clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 250-2100 Gallons Per Minute (GPM) at TDH up to 160 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 9-inches in diameter.

6-inch Electric Trailer Mounted Pump

Nonclog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 450-2500 Gallons Per Minute (GPM) at TDH up to 200 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 9-inches in diameter.

8-inch Electric Trailer Mounted Pump

Nonclog pumps designed for high solids pumping applications.  Designed for high solids industrial pumping applications. Operating Levels: 1400-3600 Gallons Per Minute (GPM) at TDH up to 230 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless.  Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 9-inches in diameter.

10-inch Electric Trailer Mounted Pump

Non- clog pumps designed for high solids pumping applications. Designed for high solids industrial pumping applications. Operating Levels: 1600-5000 Gallons Per Minute (GPM) at TDH up to 240 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Applications: Mining, Chemical, Sand and Agg, Oil and Gas, Paper and Pulp, Fly Ash and Coal Ash. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 9-inches in diameter.

12-inch Electric Trailer Mounted Pump

Non-clog pumps designed for high solids pumping applications.  Designed for high solids industrial pumping applications. Operating Levels: 2600-7300 Gallons Per Minute (GPM) at TDH up to 180 feet. Percentage of solids up to 40-70%. Standard Materials for Wet Ends: High Chrome 28%, Ductile Iron, Stainless Steel, Duplex Stainless. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Features and Benefits: Non-Clog, High Viscosity, High Specific Gravity, High Abrasives, Low pH Pumping Design. Transport 40-70% Solid. Ability to pump objects of up to 9-inches in diameter.

  • Applications: Mining, Dredging, Chemical, Sand and Agg, Oil and Gas, Paper and Pulp, Fly Ash, Coal Ash, Wastewater.
  • Our patented pump technology outperforms all centrifugal, vortex and positive displacement pumps in a variety of the most difficult pumping applications.
  • Our products replace bell, gulf atlantic, keene, rov dredge pump, sand, bell, ellicott, piranha, thomas simplicity, sunbo, metso gardner, amt, china, & holland.