Dredge & Pumping Equipment
Meet your contract requirements with our full line of dredging and pumping equipment.
Excavator Dredger
Dredging Excavator cutter-head for sand, gravel, mud, clay for severe jobsites. Optional liner-safe options, self-cleaning mud heads, and extended cutter-heads.
Excavator Pump Attachment Hydraulic 4-Inch |
Excavator Pump Attachment Hydraulic 6-Inch |
Excavator Pump Attachment Hydraulic 8-Inch |
Excavator Pump Attachment Hydraulic 10-Inch |
Excavator Pump Attachment Hydraulic 12-Inch |

Pond and Lagoon Mini Dredge
The Dredge Sled / Mini Dredge is a cost-effective solution for your pond, lagoon, canal, tailings pond, and settling tank cleaning. In addition, Dredge Sleds are engineered and sized to meet the clients’ requirements. Contact us to help with your project.
4-Inch Electric |
6-Inch Electric |
4-Inch Hydraulic |
6-Inch Hydraulic |

Cable Deployed Water Jetting Dredge Pump
Deploy from crane, excavator, or a-frame barge, as a result you can easily dredge only targeted materials, 4-inch through 12-inch pumps, 100-450 cubic yards per hour
Cable Deployed with Jetting Ring 4-inch Hydraulic |
Cable Deployed with Jetting Ring 6-inch Hydraulic |
Cable Deployed with Jetting Ring 8-inch Hydraulic |
Cable Deployed with Jetting Ring 10-inch Hydraulic |
Cable Deployed with Jetting Ring 12-inch Hydraulic |

Diver Operated Dredger
Electric or hydraulic powered, run 1, 2 or 3 hoses for dive operators at once, 75 to 150 cubic yards of material per hour, fully submersible, 300-ft of suction hose can be added to the suction inlet of the pump, no booster pumps required as you can easily pump material over 2500-ft
4-inch Diver Operated Dredge (Electric), 100 HP Pump |
4-inch Diver Operated Dredge (Electric), 75 HP Pump |
4-inch Diver Operated Dredge (Hydraulic) 75 HP Pump |
6-inch Diver Operated Dredge (Hydraulic) 150 HP Pump |

Autonomous Dredger
This semi-automated dredge has a footprint of only 650 sq. ft. By anchoring 3 to 4 cables on land, the system can effectively dredge a large area without any onboard crew. Can move slurry, sludge and high solids up to 4000 GPM at over 400 ft of head.
4-inch Hydraulic |
6-inch Hydraulic |
8-inch Hydraulic |
10-inch Hydraulic |

Self-Priming Slurry Pumps
Incorporates a vacuum-assisted priming unit, this fills the pump with slurry or target material, then allowing for the main pump to work without having to be submerged.
4-INCH HD High Chrome, 49 HP Diesel, Tier 3 Engine, with trailer |
4-INCH HD High Chrome, 74 HP Diesel, Tier 4 Engine, with trailer |
4-INCH HD High Chrome, 125 HP Diesel, Tier 4 Engine , with trailer |
6-INCH HD High Chrome, 125 HP Diesel, Tier 3 Engine , with trailer |
6-INCH HD High Chrome, 173 HP Diesel, Tier 4 Engine , with trailer |

Pump & Electric Motor
Our industrial non-clog slurry pumps engineered for dredging, process pumping applications, highly viscous or abrasive material, sludge, muck, paste, high solids and abrasive applications.
We offer submersible pumps and flooded suction pumps shipped to you pre-configured to your requirements.
1-Inch Pump HD-1000 |
2-Inch Pump HD-2000 |
3-Inch Pump HD-3000 |
4-Inch Pump HD-4000 |
6-Inch Pump HD-6000 |
8-Inch Pump HD-8000 |
10-Inch Pump HD-10000 |
12-Inch Pump HD-12000 |

Hydraulic Skid Mount Slurry Pump & Engine
Slurry pumping requires high peak amounts of torque when solids pass through the pump, a hydraulic pump system is able to handle the highest possible demands for power vs an electric pump system.
4-inch high chrome pump, 80 cc hydr motor |
6 inch high chrome pump, 180cc hydr motor |
8 inch high chrome pump, 500 cc hydr motor |
10 inch high chrome pump, 500 cc hydr motor |

Slurry Booster Pump
If you are pumping slurry or viscous material long distances or you have to increase the amount of lift to the top of the plant you may need a booster pump.
4-inch Booster Diesel 125 hp |
4-inch Booster Electric 125-hp |
6-inch Booster Diesel 250 hp |
6-inch Booster Electric 250 hp |
8-inch Booster Diesel 450-500hp |
8-inch Booster Electric 500 hp |
10-inch Booster Diesel 450-500 hp |
12-inch Booster Diesel 700 hp |
12-inch Booster Electric 700 hp |

Hydraulic Power Units (HPU)
The HPU powers the excavator dredge pump attachment. This can ensure that there is more than enough power to the cutter-head in situations where aggressive cutter-head use is being employed.
125HP Hydraulic Power Unit (Ideal for 4-inch Pumps) |
325HP Hydraulic Power Unit (Ideal for 6-inch Pumps) |
550HP Hydraulic Power Unit (Ideal for 8-inch and 10-inch Pumps) |
700HP Hydraulic Power Unit (Ideal for 12-inch Pumps) |

Dredge Attachments
Optional attachments for our dredging equipment
- Self-cleaning heads
- Water jetting ring for agitation
- Extended cutter head
- Mixer heads
- Auger Heads
- Liner Safe Wheels & Tracks
